48 hours
Don't roll the windows down
Keep the windows closed for at least 48 hours so the film sets.
Window Film
What to do after
window film installation
Follow these steps so the film sets properly and stays in good shape for years.
Last updated: September 2026- First 48 hoursDon't roll the windows down
- First weekDon't clean the inside of the glass
- After thatGentle cleaning only
First days
Right after installation
7 days
Don't clean the inside of the glass
Wait 7 days before cleaning the film side.
1 week
Don't stick anything on the glass
No stickers and no suction phone holders in the first week.
Bubbles after installation
When are they normal?
Normal
Small bubbles in the middle of the glass
This is the installation water. It clears with sun and heat. Don't press on it.
Visit the branch
Long bubbles at the bottom of the glass
If they appear at the bottom seal, don't roll the window down. Visit the branch first.
After the first week
Ongoing care
Microfiber
Clean gently
A clean, soft microfiber cloth with water or mild soap.
Ammonia-free
Ammonia-free glass cleaner
Ammonia can damage the film. Read the cleaner's ingredients before using it.
No
No brushes or rough sponges
No sharp tools or dirty cloths either. Trapped sand scratches the film.
We're here
When to contact us
- Bubbles or haze after 3 weeksThey normally disappear before then.
- Peeling or a lifted edgeAt any time.
- Dust or a clear air bubbleAfter the film dries.
- A scratch or tear in the filmWe'll check it at the branch.
Instructions for other services